Hello everyone. Has anyone used the Cpro with the cinetape, does it work? and if you use the Cpro as the focus control, what control do you use for iris control? any recommendation will be appreciated
![](https://static.wixstatic.com/media/f8e864_92616ef0e1e34630a4a0b9487820f21f~mv2.jpg/v1/fill/w_288,h_162,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/f8e864_92616ef0e1e34630a4a0b9487820f21f~mv2.jpg)
![](https://static.wixstatic.com/media/f8e864_b7f4ff215639401c97895ac87f9b0062~mv2.jpg/v1/fill/w_940,h_240,fp_0.50_0.50,q_80,usm_0.66_1.00_0.01,enc_auto/f8e864_b7f4ff215639401c97895ac87f9b0062~mv2.jpg)
cmotion official
Problem: Iris readout on Alexa Mini Overlay is always the reverse of what the cPro has mapped.
I'm sending the readout through the LBUS port on the PL lens mount from a cforce mini motor. I remember there was a workaround to fix this but I'm blanking on it today. Maybe it was physically flipping motors?
Like others mentioned the fix is to match the direction on the camera and handset. I find there is a handful of other little issues with the 5.2 FW that if I’m not on the A35 or DSMC3 camera I’ll go back to the 5.0.2 FW and everything works like normal.
Is there a CAM cable to Le m6p for the Aaton XTR/XTera? Similar to the Cvolution C019-KE8 cable?
Yes, I just got it made at Cmotion; [C0XE-K12] Cable CAM (7p) - Aaton XTR RS (2p)/power
camera interface cable Le m(5+2)p - RS Le m2p (0.7m/2ft 4in) for Aaton XTR cameras, including power (Le m2p) (RUN/STOP)
Planning on purchasing a cpro plus kit very soon and wondering how everyone's pelican cases are looking? What's your case organization like?
Yeah, I still use the semi-hard case it shipped with, honestly. Fits 3 motors, all my cables, batteries, pre-marked rings and a few blank, and the handset with some extra space. I also have a ring holder that I got 3d printed and a battery holder that was 3d printed in the case plus chargers and 6 batteries.
When I fly with it, I just pack the essential pieces into my 1510 and carry it on with whatever batteries I'm bringing. Seems to work just fine at the moment but I'm a little jealous looking at some of these other pics, haha.
Miembros
First Mover
FPAW - Partner
FPAW - Partner
cmotion
First Mover
file share admin
First Mover
community manager
With an LCUBE CUB-1 and the rangefinder license it works. You can set a use button to auto focus if you'd like as well. Most people use the slider for iris, but you're able to assign all control axis' to whatever you'd like